LOW TYPE WIRE MESH PARTITION
 Basic
Panels Up to 12 Feet High
Specifications - Standard Duty
Many other combinations of wire size and spacing are available.
Square or rectangular patterns of woven wire are also obtainable
as well as various channel sizes. Panels made in any width up to
recommended maximum of 5'0". Single panel height recommended
to 12'0". All corners mortise and tenon.
The Following Types are Made of 11/2" Diamond Mesh and 10
GA. (.135") Wire with Channel Framing as Shown.
 |
|
Vertical Frame
|
1" x 1/2" x 1/8"
|
|
Horizontal Frame
|
1" x 1/2" x 1/8"
|
|
Hinge Doors
|
1" x 1/2" x 1/8"
|
|
Slide Doors
|
1" x 1/2" x 1/8 All doors are banded, on
all four sides with 1/8" thick bar.
|
|
Horizontal Stiffeners
|
2-1" x 3/8" x 1/8"
|
|
Locks
|
Mortise cylinder type, keyed one side, recessed turn
knob other side.
|
|
Top Capping Bar
|
21/4" x 1" cold rolled channel.
|
|
|
Call Us Today for a brochure!
800-458-3286
|
|
|
|
 Ordering Information
| |
585 Stephenson Hwy.
Troy, Michigan 48083-1134
TOLL FREE: 800-458-3286
Phone: 248.585.6350
Fax: 248.585.4121
email: pwci@flash.net
|
|
